Growing Lighting LED Lights

LED Lights

LED lighting is the new kid on the block for indoor growers but the truth is that the technology has been around since the early 1900s. That was when it was first discovered that light could be produced by passing electricity 'through' a solid substance.

It's the same type of technology that's used in, say a ruby laser and it's also why LEDs use up to 75% less electricity. You see, in a gas light like a metal halide or sodium vapor lamp the light is generated by the electricity causing molecules to generate friction by moving around quickly.

It's this 'friction' that in turn generates heat that in turn creates the light and it just takes less energy to pass through something than it does to have to stick around and force things to run around bumping into each other. So then let's talk about LED lighting technology, what it can do for you as a grower, and whether or not it's worth the extra cost.

Just All Around Better Light for Growing

First off without going into too much complex detail, in terms of optimal light spectrum output LED lighting is by far the better choice. Yes your plants primarily require light in the red and blue spectral range but those aren't the only colors that they need and use.

They require a complete light range to thrive and it turns out that LED lights do a better job of providing that than all other forms of standard lighting currently available. They also 'watt for watt' produce substantially more light in the red and blue range, so they are for sure the better option in this respect.

It Spreads Out Better Too

LEDs also disperse the light that they produce more evenly than standard lighting sources. That is that they don't have a weak outer area and a strong inner light zone that you'll see with metal halides and sodium vapor bulbs.

This is why for instance that you may have already heard or read that LEDs eliminate the need for a rotating light fixture like the popular Sun Circle Light Mover. Now while this may true in smaller indoor grow-ops, none the less there's something else to consider here if you're considering switching over to LEDs in a larger room.

That is that one of the big selling points of LEDs is that because of their low heat output you can lower them right down right on top of your plants to keep them from growing tall and spindly. Once again no rotating fixture required.

You May Still Need a Rotating Fixture

The deal is though, that if you have, say an 800 watt LED light system dropped down directly on top of the plants in the center of your room, even with LEDs wide dispersal rate it will still leave the plants growing on the outer edge lacking. So yes you can and should get as close as you can to the tops of the plants, but in a larger room unless you're using a series of smaller LED lamps you're still going to need a rotating fixture.

Better Disbursement Means Outer Plants Won't Lean

Then there's another big 'plus' here for LEDs that needs to be taken into account. That is that anyone who's grown in a decent sized room with 1000 watt bulbs on a rotating light fixture knows that because of their limited dispersal rate the plants on the outside edge will still lean in.

They lean in about 6 inches or so. So if you do the math here, a full 6 inches of empty grow space along the outer edges of, say a 10 foot by 10 foot square room comes out to be about 20 square feet of wasted space. That's a lot of space!

LED lights on a rotating light fixture, due to their more even light dispersal rate, eliminate that wasted growing area. In a well managed grow room that's about 20 square feet total translates into about a pound of additional finished product. Bud that you otherwise won't have with standard thousand watt metal halides.

Cooler Lights are Not Always Better

Then a lot of talk has gone on about the fact that LED lights run substantially cooler, and anyone who has grown indoors knows that heat can be a big problem. At the same time though, during winter months in a colder region the heat generated by metal halides and their ballast can be a plus.

This is particularly true if you're venting system is blowing a lot of air. So in this respect the low heat factor of LED lighting can work for or against a grower depending on the time of year and where they live.

Another thing that's rarely mentioned about LED's is that they're for sure far more durable so they're less prone to damage. Now anyone who's moved around in an indoor grow knows that things can get a little bit cramped. So this eliminates the risk of possible damage from bumping up against your light source. Now granted this isn't a huge deal, but none the less, if you have yet to set up your room you're going to find out when you do that it's something to think about.

They Also Last a Whole Lot Longer

LED lights also last substantially longer. How long? As it turns out exact figures are hard to come by in this area but generally speaking they'll last about twice as long as a metal halide, but there's something you need to consider here.

That is that metal halide and sodium vapor lamps die a 'slow lingering death' and what that means is that they gradually fizzle out. So while you're busy crunching your numbers you need to take into account that for the serious grower a metal halide or sodium vapor bulb exceeds its 'viable' usefulness to a grow room long before they exceed their actual rated service life.

The Bottom Line

In terms of cost, while being more costly to buy on the 'front end', over their service life with the electricity savings alone LED lights do cover that extra cost when compared to metal halides and sodium vapors.

More even light dispersion works to eliminate plant leaning on the outer edges of the grow room for more efficient use of grow room space. So LED lights can pay for themselves with the first crop in a larger room.

Because LED lights generate less heat they are by far the preferred choice in a warmer climate. They're also hands down the better option in smaller spaces and rooms where carbon dioxide enrichment is used because lower heat allows for a lower ventilation rate

In terms of light spectrum range and rate of production, and most particularly light in the red and blue wavelengths, LEDs dominate over all other grow lights currently in use, so your plants will grow thicker, faster, heavier and healthier.
Marijuana Booster - Double Your Yield
Buy Quality Hemp Oil
LED Lights 4.17 out of 5 based on 6 ratings. 6 user reviews.
Please Sign In » or Register Now to rate this.
GreenthumbTDK | Dec 5, 2014
If you're LED Grow light doesnt last the time it should have. Start to check the power supplies to the circuit board. What you wanna do is check if one of the power supplies are out. Rare cases its where the LEDs wiring goes to the Circuit board. I had a wire that had a short in it from the power supply to the LED panel. I Replaced it and works good as new. Normally, if just one or four light emitting diodes die, it will not effect the rest leds , since there are fuse/Zener diode protect the whole circuit. Atleast on the ones i got thats a way to fix them easy fix too. power supplies aren't much and thats most likely what goes out. Circuit boards are hard to break with the Aluminum heat-sinks cooling down with the fans very well you can run em 24 hours for veg stage and stay same temperature very consistent. If a few diodes look like they're dead they might be some inferred LED's they are very hard to see by eye, may even be invisible to our eyes.
GreenthumbTDK | Mar 5, 2013
5 stars5 stars5 stars5 stars5 stars
I use all LEDs for my main grows bloom and veg stages accept for cloning i use t5 24" fixture that comment by Guest | Feb 10, 2013 was me but i wasnt logged in lol owell
Guest | Feb 10, 2013
5 stars5 stars5 stars5 stars5 stars
Agreed 6 band LEDs are very good and can get closer to the plants and they also can be easier to set up require no ballasts or external fans for the lighting because there are fans on my light house hydro black star 180 watt Hi Output LEDs and the 100 watt black star LEDs two in another tent they work very well in small areas and can still cover outer plans and get threw the canopy if i veg too long i find the plants need to have some leaves and parts removed to let light through the canopy to lower buds but thats normal for flowering and removing some fan leaves and branches strategically can lead to promoting growth toward the tops of the plants canopy resulting in better yields and faster veg to flower periods also lower buds are as dense as the colas usually with the plant trained correctly
Guest | Oct 26, 2012
4 stars4 stars4 stars4 stars4 stars
leds are good just need 6 band lengths of light spectrum
Guest | Oct 26, 2012
5 stars5 stars5 stars5 stars5 stars
leds rule end of story just gotta get ones designed for wat you wanna use it for and use at right distance away from plants tops light house hydros blackstar leds and other companies do good for growing medicinal quality dont belive me read hightimes in a article they said alright i know i said they suck but technology has come a long way in last few years so now people use as commercial grows and use less energy per month too
CannaConnoisseur | May 20, 2012
I think there's already a section on LEDs but this is good too.